Netgear M5300-52G3 Web Management User Guide - Page 241

ProSafe M5300 Switch Area Range Configuration Use the OSPF Area Range Configuration page to configure and display an area range for a specified NSSA. To display the Area Range Configuration page, click Routing OSPF Advanced  Area Range Configuration. To configure an OSPF area range: 1. Use Area ID to specify the area for which data is to be configured. 2. Use IP address to enter the IP Address for the address range for the selected area. 3. Use Subnet Mask to enter the Subnet Mask for the address range for the selected area. 4. Use LSDB Type to select the type of Link Advertisement associated with the specified area and address range. The default type is 'Network Summary'. 5. Use Advertise to select Enable or Disable. If you select Enable, the address range will be advertised outside the area via a Network Summary LSA. The default is Enable. 6. Click ADD to add the new address range to the switch. 7. Click DELETE to remove the specified address range from the area configuration. Routing 241