Netgear M5300-52G3 Web Management User Guide - Page 119

3. Configuring Switching Information 3 Use the features in the Switching tab to define Layer 2 features. The Switching tab contains links to the following features: • VLANs on page 119 • Auto-VoIP Configuration on page 134 • iSCSI on page 139 • Spanning Tree Protocol on page 143 • Multicast on page 156 • MVR Configuration on page 173 • Address Table on page 177 • Ports on page 181 • Link Aggregation Groups on page 184 VLANs Adding Virtual LAN (VLAN) support to a Layer 2 switch offers some of the benefits of both bridging and routing. Like a bridge, a VLAN switch forwards traffic based on the Layer 2 header, which is fast, and like a router, it partitions the network into logical segments, which provides better administration, security and management of multicast traffic. By default, all ports on the switch are in the same broadcast domain. VLANs electronically separate ports on the same switch into separate broadcast domains so that broadcast packets are not sent to all the ports on a single switch. When you use a VLAN, users can be grouped by logical function instead of physical location. Each VLAN in a network has an associated VLAN ID, which appears in the IEEE 802.1Q tag in the Layer 2 header of packets transmitted on a VLAN. An end station may omit the tag, or the VLAN portion of the tag, in which case the first switch port to receive the packet may either reject it or insert a tag using its default VLAN ID. A given port may handle traffic for more than one VLAN, but it can only support one default VLAN ID. From the VLAN link, you can access the following pages: • Basic on page 120 • Advanced on page 122 119