Netgear M5300-52G3 Web Management User Guide - Page 164
IGMP Snooping Querier Configuration, Querier IP Address
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
ProSafe M5300 Switch IGMP Snooping Querier Configuration Use this menu to configure the parameters for IGMP Snooping Querier. Note that only a user with Read/Write access privileges may change the data on this screen. To access this page, click Switching Multicast IGMP Snooping Querier Configuration. To configure IGMP Snooping Querier settings: 1. Use Querier Admin Mode to select the administrative mode for IGMP Snooping for the switch. The default is disable. 2. Use Querier IP Address to specify the Snooping Querier Address to be used as source address in periodic IGMP queries. This address is used when no address is configured on the VLAN on which query is being sent. 3. Use IGMP Version to specify the IGMP protocol version used in periodic IGMP queries. IGMP queries. 4. Use Query Interval(secs) to specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1 and 1800. The default value is 60. 5. Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the last querier information is removed. The Querier Expiry Interval must be a value in the range of 60 and 300. The default value is 60. Field VLAN Ids Enabled For IGMP Snooping Querier Description Displays VLAN Ids enabled for IGMP snooping querier. Configuring Switching Information 164