Netgear M5300-52G3 Web Management User Guide - Page 316

ProSafe M5300 Switch PIM Interface Configuration To display the IPv6 PIM Interface Configuration page, click Routing IPv6 Multicast PIM  Interface Configuration. To configure IPv6 PIM interface settings: 1. Select the check box associated with each interface you want to configure. Select the check box in the heading row to apply the same settings to all interfaces. 2. Use Admin Mode to set the administrative status of PIM-DM for the selected interface. The default is disable. 3. Use Hello Interval to enter the number of seconds between PIM hello messages transmitted from the selected interface. The default value is 30. Valid values are from 10 to 3600. Field Protocol State IPv6 Prefix/Length Neighbor Count Designated Router Description The operational state of the PIM protocol on this interface. The IPv6 Address Prefix and the Length of the selected interface. The number of PIM neighbors on the selected interface. The designated router on the selected PIM interface. For point-to-point interfaces, this will be 0.0.0.0. Routing 316