Netgear M5300-52G3 Web Management User Guide - Page 75

ProSafe M5300 Switch To configure the mode of the stack ports: 1. Select the check box associated with the unit and port to configure: 2. From the Configured Stack Mode field, select the operating mode: • Stack. The port connects to the stack port on another stack member. This is the default value. • Ethernet. The port operates as a standard switch port that receives and transmits network traffic 3. Click Apply to apply the new settings to the system. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click Refresh to update the screen with the current information. The following table describes Stack Port Configuration fields. Field Unit ID Port Slot ID Type XFP/SFP+ Adapter Running Stack Mode Description Displays the unit. Displays the stackable interfaces on the given unit. Displays the slot Id in the format unit/slot. Displays the type of stackable interfaces on the given unit. Displays the Name of the XFP/SFP+ Adapter. Displays the run-time mode of the stackable interface. Configuring System Information 75