Netgear M5300-52G3 Web Management User Guide - Page 67

ProSafe M5300 Switch To configure the DHCPv6 Relay information for one or more interfaces: 1. Select the check box associated with each interface to configure, or select the check box in the heading row to apply the same configuration to all interfaces. 2. In the Admin Mode field, specify the DHCPv6 mode to configure DHCPv6 Relay functionality. DHCPv6 server and DHCPv6 relay functions are mutually exclusive. 3. In the Relay Interface field, specify an interface to reach a relay server. 4. In the Destination IP Address field, specify an IPv6 Address to reach a relay server. 5. In the Remote ID field, specify the relay agent information option. The remote ID needs to be derived from the DHCPv6 server DUID and the relay interface number, or it can be specified as a user-defined string. 6. Click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately. 7. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Configuring System Information 67