Netgear M5300-52G3 Web Management User Guide - Page 301
IGMP Proxy Interface Configuration, Routing, Multicast, Interface, Admin Mode, Version
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
ProSafe M5300 Switch IGMP Proxy Interface Configuration To display the IGMP Proxy Interface Configuration page, click Routing Multicast IGMP Proxy Interface Configuration. To configure an interface as an IGMP proxy: 1. Use Interface to select the port for which data is to be configured. You must have configured at least one router interface before configuring or displaying data for an IGMP Proxy interface and it should not be a IGMP routing interface. 2. Use Admin Mode to set the administrative status of IGMP Proxy on the selected interface. The default is disable. Routing, IGMP and Multicast global admin modes should be enabled to enable IGMP Proxy interface mode. 3. Use Version to enter the version of IGMP you want to configure on the selected interface. Valid values are (1 to 3) and the default value is 3. This field is configurable only when IGMP Proxy interface mode is enabled. 4. Use Unsolicited Report Interval to enter the unsolicited time interval value in seconds. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. Valid values are from (1 to 260). The default value is 1. Field IP Address Subnet Mask Operational Mode Number of Groups Description The IP address of the IGMP Proxy interface. The subnet mask for the IP address of the IGMP Proxy interface. The operational state of IGMP Proxy interface. The current number of multicast group entries for the IGMP Proxy interface in the cache table. Routing 301