Netgear M5300-52G3 Web Management User Guide - Page 297
IGMP Routing Interface Configuration, Last Member Query Interval
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
ProSafe M5300 Switch IGMP Routing Interface Configuration To display the IGMP Routing Interface Configuration page, click Routing Multicast IGMP Routing Interface Configuration. To configure an interface for IGMP: 1. Use the check boxes associated with the Interface field to select each interface to configure. The same settings are applied dot all selected interfaces.. 2. Use Admin Mode to set the administrative status of IGMP on the selected interface. The default is disable. 3. Use Version to enter the version of IGMP you want to configure on the selected interface. Valid values are (1 to 3) and the default value is 3. This field is configurable only when IGMP interface mode is enabled. 4. Use Robustness to enter the robustness value. This variable allows tuning for the expected packet loss on a subnet. If you expect the subnet to be lossy, you should enter a higher number for this parameter. IGMP is robust to (robustness variable-1) packet losses. Valid values are from 1 to 255. The default value is 2. 5. Use Query Interval to enter the frequency in seconds at which IGMP host-query packets are to be transmitted on this interface. Valid values are from 1 to 1800. The default value is 125. 6. Use Query Max Response Time to enter the maximum query response time to be advertised in IGMPv2 queries on this interface, in tenths of a second. The default value is 100. Valid values are from(0 to 255). 7. Use Startup Query Interval to enter the number of seconds between the transmission of startup queries on the selected interface. The valid values are from 1 to 300. The default value is 31. 8. Use Startup Query Count to enter the number of queries to be sent on startup. The valid values are from 1 to 20. The default value is 2. 9. Use Last Member Query Interval to enter the last member query interval in tenths of a second. This the maximum response time to be inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Valid values are from 0 to 255. The default value is 10. This value is not used for IGMP version 1. Routing 297