Netgear M5300-52G3 Web Management User Guide - Page 312
Admin Boundary Configuration, Routing, Multicast, Admin, Interface, Group IP, Group Mask, DELETE
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
ProSafe M5300 Switch Admin Boundary Configuration The definition of an administratively scoped boundary is a mechanism to stop the ingress and egress of multicast traffic for a given range of multicast addresses on a given routing interface. To display the Admin Boundary Configuration page, click Routing Multicast Admin Boundary Configuration. To configure an administrative boundary: 1. Use Interface to select the router interface for which the administratively scoped boundary is to be configured. 2. Use Group IP to enter the multicast group address for the start of the range of addresses to be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255. 3. Use Group Mask to enter the mask to be applied to the multicast group address. The combination of the mask and the Group IP gives the range of administratively scoped addresses for the selected interface. 4. Click ADD to add a new administratively scoped boundary. 5. Click DELETE to delete the administratively scoped boundary selected. Routing 312