Oki MB471 Users Manual Advanced - Page 124
Network Card Setup, Launching the Utility, Configuring Network Settings, Set Web settings
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Windows Utilities Network Card Setup You can use the Network Card Setup to configure the network. In order to use Network Card Setup, TCP/IP needs to be activated. Note This requires administrator rights. Even when connected using a wireless LAN, the displayed MAC address becomes the MAC address of the wired LAN. Memo To check the machine MAC address, press the key, and on the machine operating panel select [View Information]>[Network]. Launching the Utility 1 Hold down the power switch for about a second to turn on the power. 2 Turn on you computer, and insert the Software DVD-ROM. 3 Click [Run setup.exe]. If the [User Account Control] dialog box appears, click [Yes]. 4 Select the device and click [Next]. 5 Read the user license agreement and click on [I Agree]. 6 Select [Device Configuration]> [Network Card Setup Utility]. Configuring Network Settings 1 Launch Network Card Setup. 2 Select the machine from a list. 3 Select [Setting Printer] from the [Setting] menu. 4 Change the items as required and click on [OK]. 5 Enter your password into [Password] and click on [OK]. - The default password is the last 6 alphanumerical digits of the Ethernet address. - The password is case sensitive. 6 Click [OK] on the confirmation window. The machine restarts to enable the new settings. During the restart, the machine status icon changes to red. The machine will restart, the new settings will become active, and the status icon will turn green. Set Web settings You can launch the webpage, and set the main unit network. Enable Web Settings 1 Launch Network Card Setup. 2 Select the machine from the list. 3 Select [Setting Printer] from the [Setting] menu. 4 Select the [Printer Web Page] tab. 5 Select [Printer Web Page - Enable] and click on [OK]. 6 Enter your password into [Password] and click on [OK]. - The default password is the last 6 alphanumerical digits of the ethernet address. - The password is case sensitive. 7 Click [OK] on the confirmation window. The network card restarts to enable the new settings. During the restart, the machine status icon changes to red. The machine network card will restart, the new settings will be active, and the status icon will turn green. Opening a Webpage 1 Launch Network Card Setup. 2 Select your machine from the list. 3 Select [View Web Page] from the [Setting] menu. The webpage will restart, and the machine status page will be displayed. - 124 -