Oki MB471 Users Manual Advanced - Page 92
Lines Per Paper Black Setting
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
List of the Device Setting Menu Items Print Menu Item Print Setup Copies Duplex Binding Resolution Toner Save Mode Orientation Lines Per Page Edit Size Width Length Printer Adjust Manual Timeout Wait Timeout Timeout Local Timeout Net Jam Recovery Paper Black Setting Darkness SMR Setting BG Setting Factory Default Description 1 Sets the number of copies of a document to be printed. For local printing, this set- ting is invalid except for demo data. Avail- able range: 1 to 999. OFF Sets whether to use the duplex function by default. Long edge bind Sets the default binding position for duplex printing. 600dpi Sets the resolution. OFF Sets whether to use the toner save mode. Portrait Selects the page orientation. 60 or 64 lines Sets the number of lines of text per page (for PCL only). The default number of lines for A4 portrait is 64. The default number of lines for Letter portrait is 60. The number differs depending on the size of paper on the feed tray. Cassette size Sets the size of the printable page area to match the size of the paper when there is no specification by the command of paper edit size specification from the computer. It is unavailable in PS. 210 mm (8.3 Sets the default width of the custom size inch) or 8.5 paper. Available range: 86 to 216 mm (3.4 inch (216 mm) to 8.5 inches). 297 mm (11.7 inch) or 11 inch (279 mm) Selects the default length of the custom size paper. Available range: 140 to 1321 mm (5.5 to 52.0 inches). 60 seconds Sets how many seconds the machine will wait for paper to be fed before cancelling a job. 40 seconds Sets how many seconds the machine will wait when received data pauses before forcing a page eject. A PS job is canceled if timeout occurs. 40 seconds Sets the time of open of each port after end of job. (The network is excluded.) 90 seconds Sets the time of open of Network port after end of job. Enable Sets whether the machine will attempt to re-print any pages lost due to a paper jam once the jam has been cleared. 0 Sets values to make a fine adjustment to very visible faded print results or light specks (or streaks) results in plain paper black setting. 0 Sets print darkness. 0 Corrects variations in print results caused by temperature and humidity conditions and differences in print density and fre- quency. Change the setting if the print quality is uneven. 0 Corrects variations in print results caused by temperature and humidity conditions and difference in print density and fre- quency. Change the setting if the back- ground is dark. - 92 -