Oki MB471 Users Manual Advanced - Page 44
Using Network Configuration
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Using Drivers and Software Using Network Configuration Network Configuration is a tool to set in advance when executing Scan To Local PC. In addition, if the information including the device and IP address of the computer, etc. is changed when performing network scan, the setting value can be changed by this tool. When installing ActKey, Network Configuration is also installed simultaneously. Network Configuration will be automatically run when you log on windows if you select it in task tray menu. When starting Network Configuration, the scanner driver installed in the computer is displayed. Note Even when connected using a wireless LAN, the displayed MAC address becomes the MAC address of the wired LAN. Method to add a new network scanner To add a new network scanner, select [Add Scanner] from the [Scanner] menu, and select scanner driver name of the added scanner. Method to change a scanner driver name When a scanner driver name has been changed, select [Edit Driver Name] from the [Scanner] menu and then change the scanner driver name. Method to change the setting information of the machine When the IP address of the machine and port number of the machine have been changed, start Network Configuration and then select [Edit Scanner] from the [Scanner] menu. Method to set Scan To Local PC To execute Scan To Local PC, you need to register the computer name, IP address and port number in the machine. After installing the scanner driver, start Network Configuration and select the driver to be used. Then, select [Properties] from the [Scanner] menu and select the [Register] tab. As the computer information, the computer name, IP address and port number are displayed. The computer name does not have to be set since the computer's host name is automatically acquired. Although the setting value of the computer is automatically displayed for the IP address, if multiple network cards are installed in the computer, multiple IP addresses are displayed. Select the IP address of the network card currently used. Further more, for the port number, the current setting is displayed. If you need to change, change the setting. After all settings are complete. Click [Register] button to register the setting in the machine. If the machine is tuned off and cannot be connected, an error occurs when registering. After registering, if the computer's name, IP address or port number is changed, you need to register again with the above procedure. The setting value set in the current computer is displayed, and then change the IP address and port number of the machine. - 44 -