Oki MB471 Users Manual Advanced - Page 93

Print Menu Item Print Position Adjust Front X Adjust Front Y Adjust Back X Adjust Back Y Adjust Drum Cleaning Hex Dump System Configuration Menu Personality Alarm Release PCL Setup Auto Continue Error Report Font Source Font No. Font Pitch Font Height Symbol Set A4 Print Width White Page Skip CR Function LF Function List of the Device Setting Menu Items Factory Default Description 0.00 mm Adjusts the position of the whole printing image perpendicular to the direction of paper movement. Available range: ±2.00 mm (0.25 increments). 0.00 mm Adjusts the position of the whole printing image parallel to the direction of paper movement. Available range: ±2.00 mm (0.25 increments). 0.00 mm Adjusts the position of the image on the reverse side of a duplex print perpendicular to the direction of paper movement. Available range: ±2.00 mm (0.25 incre- ments). 0.00 mm Adjusts the position of the image on the reverse size of a duplex print parallel to the direction of paper movement. Available range: ±2.00 mm (0.25 increments). OFF Sets whether to do cleaning of a drum before printing. It may have an effect for improvement of image quality. OFF Prints out the data received from the host computer in hexidecimal code. To finish printing, turn off the power. 6 Auto Emulation Selects the emulation mode. When set to auto, the correct emulation is automatically selected each time a print job is received. Manual When [Manual] is selected, non-critical warnings, such as requests for a different paper size, can be cleared by pressing the key. When [Auto] is selected, they are cleared when the print job resumes. OFF Sets whether the machine automatically recovers from a memory overflow. OFF Sets whether to print error details when PostScript errors occur. Resident Selects the location of the font to use. I0 10.00 CPI 12.00 point PC-8 78 Column OFF CR LF Selects the number of the font to use. Available range: I0 to I90 when [Resident] is set. Sets the width of the PCL default font. Available range: 0.44 to 99.99 CPI (0.01CPI increments). Sets the height of the PCL default font. Available range: 4.00 to 999.75 point. (0.25 point increments) Selects a PCL symbol set. Sets a number of digits for automatic line feed on A4 paper. Selects whether to print blank pages. Sets the machine operation when receiving CR code. Sets the machine operation when receiving LF code. - 93 - Configuring at the Operator Panel