Oki MB471 Users Manual Advanced - Page 128
Launch the Utility, Check Machine Settings, Set Options Automatically, Uninstall the Utility, TELNET
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Windows Utilities Launch the Utility To use Network Extension, open the printer properties screen. 1 Click on [Start] and then select [Devices and Printers]. 2 Right click on the printer icon and select [Printer Properties]. Check Machine Settings You can check the settings of the machine. Memo If you use Network Extension in an environment that is not supported, the [Option] tab may not be displayed. 1 Open the printer properties screen. Reference "Launch the Utility" P. 128 2 Select the [Status] tab. 3 Click [Update]. 4 Click [OK]. Reference Click [Web Setting] to automatically launch the webpage. You can change machine settings on this webpage screen. For details, refer to "Webpage" P. 107. Set Options Automatically You can get the composition of options of the connected machine and automatically set the print driver. Memo You cannot configure this when using Network Extension in unsupported environments. For Windows PCL/PCL XPS drivers. 1 Launch the printer properties screen. Reference "Launch the Utility" P. 128 2 Select the [Device Options] tab. 3 Click on [Get Printer Settings]. 4 Click [OK]. For Windows PS Drivers 1 Launch the printer properties screen. Reference "Launch the Utility" P. 128 2 Select the [Device Settings] tab. 3 Click on [Get installed options automatically] and then click on [Setup]. 4 Click [OK]. Uninstall the Utility 1 Click on [Start], and then select [Control Panel]>[Add or Remove Programs]. 2 Select [OKI Network Extension] and click on [Remove]. 3 Follow the instructions on the screen and complete the uninstallation. TELNET You can configure each type of setting with a Telnet command. Note Telnet access to the machine settings is turned off in the initial settings. In order to use Telnet commands, set [Telnet] to [Active], either on the webpage or on the machine control panel. For Windows 7/Windows Vista/Windows Server 2008 R2/ Windows Server 2008, Telnet commands are inactive in the initial settings. In order to use Telnet commands, select [Start] > [Control Panel] > [Programs] > [Programs and Features] > [Turn Windows features on or off]. Set [Telnet Client] to active in the displayed dialog box. Memo For the next procedure, the following environment will be used as an example. The details may differ depending on the OS you are using. - OS: Windows 7 - IP Address: 192.168.0.2 - MAC Address: 00:80:87:84:9C:9B 1 Click on [Start] and select [All Programs]>[Accessories]> [Command Prompt]. - 128 -