Oki MB471 Users Manual Advanced - Page 156
Changing Network Settings From the Web Encrypting Communication by SSL/TLS
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Changing Network Settings From the Web Page Changing Network Settings From the Web Page This section explains how to change the network settings from the machine's web page. To access the machine's web page, your computer must meet the following conditions: TCP/IP is enabled. Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed. Memo Ensure that the security setting of the web browser is set to a middle level, or that cookies are allowed. To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is "aaaaaa". Reference Some of the following settings can be performed on other utilities. For details, refer to "Network Setting Items" P. 133. Encrypting Communication by SSL/TLS You can encrypt communication between your computer and the machine. Communication is encrypted by SSL/TLS in the following cases: Change of the machine settings from the web page IPP printing Direct print LDAP search Send data via SMTP or FTP Print received data via SMTP or FTP Creating a Certificate You can create a certificate on the web page. The following two certificates are available: A self-signed certificate. A certificate created by a certificate authority. Note If you change the machine IP address after you create a certificate, the certificate becomes invalid. Be sure not to change the machine's IP address after creating a certificate. 1 Access the machine's web page and log in as the administrator. 2 Select [Admin Setup]. 3 Select [Network Manager] > [Security] > [Encryption (SSL/TLS)]. 4 Follow the on-screen instructions to specify detailed settings. Memo The machine's IP address is set to [Common Name]. 5 Click [Send]. 6 Check the settings and click [OK]. 7 If you are creating a self-signed certificate, follow the on-screen instructions and close the web page. Then go to "Enabling Encryption". If you are getting a certificate issued by a certificate authority, go to step 8. 8 Follow the on-screen instructions to send a CSR to a certificate authority. 9 Click [OK]. 10 Follow the on-screen instructions to install a certificate from the certificate authority. 11 Click [Send]. 12 Go to "Enabling Encryption". Enabling Encryption After creating a certificate, perform the following procedure to enable encryption. When you change the settings from the web page to enable encryption, communication is encrypted immediately after that change has been made. 1 Perform "Creating a Certificate" steps 1 to 3 to enter the encryption screen. 2 Select [Enable] for the desired protocol on which encryption is applied. 3 Click [Encryption Strength Settings]. 4 Select the encryption strength and click [OK]. 5 Click [Send]. - 156 -