Oki MB471 Users Manual Advanced - Page 97

Normal, Small, Auto Negotiate, MFP/MPS4200mb/MPS4700mb Only

Page 97 highlights

Item Network WINS Server (Secondary) Setting Web Telnet FTP IPSec SNMP Network Scale HUB Link Setting TCP ACK Network PS-Protocol (MB451/MB451w/MB471/ MB471w/MB491/MB491+/MB491+LP/ES4191 MFP/MPS4200mb/MPS4700mb Only) List of the Device Setting Menu Items Factory Default Description 0.0.0.0 Enable Sets a name or an IP address for the WINS server. Display condition: TCP/IP protocol is enabled and the IP version is not set to IPv6. Sets whether to enable access from a web browser. Display condition: TCP/IP protocol is enabled. Disable Sets whether to enable access from the Telnet. Display condition: TCP/IP protocol is enabled. Disable Sets whether to enable access from FTP. Display condition: TCP/IP protocol is enabled. Disable This item is displayed and it can be disabled only when IPSec is set to valid. Enable Sets whether to enable access from SNMP. Display condition: Netware is enabled and TCP/IP is enabled. Normal When [Normal] is set: the machine 6 works effectively even when connected to a HUB that has a spanning tree feature. However, printer start up time gets lon- ger when computers are connected to two or three small LANs. When [Small] is set: computers can cover from two or three small LANs to a largeLAN, but it may not work effectively when it is con- nected to a HUB with a spanning tree feature. Auto Negotiate Sets the hub linking method. Usually, select [Auto Negotiate]. Type1 Sets a type of TCP Acknowledgment. When Type1 is set, the printer replies to every packet. When Type2 is set, the printer replies to plural packets in a mass. When printing comes to take time by the setting of the hub, choosing Type2 may improve the matter. Usually, setting Type1 hasn't any problem. RAW Sets a PS-protocol. Configuring at the Operator Panel - 97 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182

List of the Device Setting Menu Items
- 97 -
Configuring at the Operator Panel
6
Network
Setting
WINS Server (Secondary)
0.0.0.0
Sets a name or an IP address for the
WINS server.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Web
Enable
Sets whether to enable access from a
web browser.
Display condition: TCP/IP protocol is
enabled.
Telnet
Disable
Sets whether to enable access from the
Telnet.
Display condition: TCP/IP protocol is
enabled.
FTP
Disable
Sets whether to enable access from FTP.
Display condition: TCP/IP protocol is
enabled.
IPSec
Disable
This item is displayed and it can be dis-
abled only when IPSec is set to valid.
SNMP
Enable
Sets whether to enable access from
SNMP.
Display condition: Netware is enabled
and TCP/IP is enabled.
Network Scale
Normal
When [
Normal
] is set: the machine
works effectively even when connected to
a HUB that has a spanning tree feature.
However, printer start up time gets lon-
ger when computers are connected to
two or three small LANs.
When [
Small
] is set: computers can cover
from two or three small LANs to a largeLAN,
but it may not work effectively when it is con-
nected to a HUB with a spanning tree feature.
HUB Link Setting
Auto
Negoti-
ate
Sets the hub linking method. Usually,
select [
Auto Negotiate
].
TCP ACK
Type1
Sets a type of TCP Acknowledgment.
When Type1 is set, the printer replies to
every packet.
When Type2 is set, the printer replies to
plural packets in a mass.
When printing comes to take time by the
setting of the hub, choosing Type2 may
improve the matter.
Usually, setting Type1 hasn't any problem.
Network PS-Protocol (MB451/MB451w/MB471/
MB471w/MB491/MB491+/MB491+LP/ES4191
MFP/MPS4200mb/MPS4700mb Only)
RAW
Sets a PS-protocol.
Item
Factory
Default
Description