Oki MB471 Users Manual Advanced - Page 154
Wireless LAN settings, Network Manager, Basic Settings, Network Connection, Wireless, Security method
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Configuring the wireless LAN from the Web Page (MB451w/MB471w only) Wireless LAN settings 1 Log in as the administrator. 2 Click the [Network Manager] tab. 3 Click the [Wireless LAN Settings] menu. 4 In the [Basic Settings] field under [Network Connection], select [Wireless]. (1) When WEP is selected: a) When [WEP] is selected, [WEP KEY] is displayed. Enter the same KEY as the WEP KEY set for the wireless AP that you want to connect to. Note There is not setting for the WEP KEY index. The WEP KEY index communications with the wireless AP as 1. Memo The default is "Disabled". 5 Enter the SSID name of the wireless AP that you want to connect to in [SSID]. Memo "default" is set as the default. 6 In the [Security method], select the same security setting as the wireless AP that you want to connect to. Depending on the selected security method, configure one of the settings from (1) to (3) below. When [Disable] is selected, press the [Send] button at the bottom left of the Web screen. (Not recommended for security reasons.) Memo After entering the KEY, the key is displayed as "*" symbols for security reasons. (2) When WPA-PSK or WPA2-PSK is selected: a) When [WPA-PSK] or [WPA2-PSK] is selected, [Encryption type] and [Pre Shared Key] are displayed. b) In [Encryption type], select the encryption type (TKIP or AES) set in the wireless AP that you want to connect to. Memo The default is "TKIP". Depending on the model of wireless AP, the mixed TKIP/AES may be supported. In this case, we recommend using AES. c) In [Pre Shared Key], enter the same KEY as the Pre Shared KEY set for the wireless AP that you want to connect to. Memo The default is "Disable". Memo After entering the KEY, the key is displayed as "*" symbols for security reasons. - 154 -