Oki MB471 Users Manual Advanced - Page 142
SNMP Trap, Network Setting Items, Printer Trap Community Name
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Network Setting Items Web page - Item TELNET Configurati Network Card Setup on Tool/ Network Setting (Windows) (Mac OS X) Plug-in Factory Default Setting Auth Key - - - (NULL) Authentication Auth - - - MD5 Settings Algorithm Algorithm Encryption Privacy - - - (NULL) Settings Passphrase Passphrase - Privacy Key - - - (NULL) Encryption Privacy - - - DES Settings Algorithm Algorithm New SNMP Read - - - public Read Community Community New SNMP Write - - - public Write Community Community Description Sets the authentication key for SNMPv3 packet authentication in HEX code. Maximum number of characters depends on the algorithm you select. Specifies the algorithm for SNMPv3 packet authentication. Sets the password to create an authentication key for SNMPv3 packet encryption. From 8 to 32 characters can be used. Sets the authentication key for SNMPv3 packet encryption in HEX code. Sixteen octets (32 characters of HEX code) can be used. Specifies the algorithm for SNMPv3 packet encryption. You cannot change this value. Sets the read community for SNMPv1 up to 15 characters. Sets the write community for SNMPv1 up to 15 characters. SNMP Trap Item Web page TELNET Configurati Network Card Setup on Tool/ Network Setting (Windows) (Mac OS X) Plug-in Factory Default Setting Printer Trap Prn-Trap - - - public Community Community Name Address 1-5 TCP #1-5 - - - 0.0.0.0 Trap Address Trap Enable TCP #1-5 - - - Disable 1-5 Trap Enable Printer TCP #1-5 - - - Disable Reboot 1-5 Printer Reboot Trap Receive TCP #1-5 - - - Disable Illegal Trap Receive 1-5 Illegal Trap Online 1-5 TCP #1-5 - - - Disable Online Trap Offline 1-5 TCP #1-5 - - - Disable Offline Trap Description Sets the community name for a printer trap up to 31 characters. Specifies a trap destination in TCP/IP. You can specify up to 5 destinations. Specifies whether to use a printer trap in TCP #1-5. Specifies whether to send an SNMP message when the machine has rebooted. Specifies whether to use a trap when a community name other than the one set in [Printer Trap Community Name Set] is used to access the machine. Specifies whether to send an SNMP message every time the machine comes online. Specifies whether to send an SNMP message every time the machine goes offline. - 142 -