Xerox 4150 User Guide - Page 196
Finisher, Errors & Faults, Description, Solution, Troubleshooting - fuser life
UPC - 095205228717
View all Xerox 4150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
12 Troubleshooting CRU Errors & Faults Toner Low Toner Empty Drum Warning Replace Drum Toner Cartridge Not Installed Toner Supplying Error Invalid Toner Cartridge Invalid Drum Cartridge Finisher Finisher Jam Full Stack Staple Cartridge Not Installed Door Open Description Solution Toner cartridge is almost empty. Open side cover and right side front door. Remove toner cartridge and gently shake it. By doing this, printing operations can be temporarily resumed. Reinstall toner cartridge. Reorder toner cartridge. Toner cartridge is empty. Open side cover and right side front door. Replace with new toner cartridge. The drum cartridge is near the end of life. The drum cartridge has reached the end of life. Ensure a replacement cartridge is in stock. Replace the SMart KitTM Drum Cartridge. The toner cartridge is not installed, or is not installed correctly. Install the toner cartridge. If already installed, check it has been installed correctly. If problem persists, call for service. Toner is not being supplied correctly. Remove the seal tape from the SMart Kit Drum Cartridge. Check the toner cartridge is installed securely. The installed toner cartridge is not a valid Xerox cartridge. Check the toner cartridge and install a valid Xerox cartridge if necessary. If problem persists, call for service. The installed drum cartridge is not a valid Xerox cartridge. Check the drum cartridge and install a valid Xerox cartridge if necessary. If problem persists, call for service. Copy paper jammed in finisher. Open finisher front cover and remove jammed paper in the finisher and fuser area. Output tray full. Remove printed material from Output tray. Staple cartridge not installed. Install staple cartridge. Finisher door open. Close finisher door. 174 Xerox WorkCentre 4150 User Guide