Dell PowerConnect 5324 Command Line Interface Guide - Page 100
sntp anycast client enable, sntp client enable (interface)
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
www.dell.com | support.dell.com sntp anycast client enable The sntp anycast client enable Global Configuration mode command enables anycast client. To disable the polling for SNTP broadcast client, use the no form of this command. Syntax sntp anycast client enable no sntp anycast client enable This command has no arguments or keywords. Default Configuration Disabled Command Mode Global configuration User Guidelines • Polling time is determined by the sntp client poll timer Global Configuration mode command. • Use the sntp client enable Interface Configuration mode command to enable the SNTP client on a specific interface. Examples The following example enables anycast clients.t Console (config-if)# sntp anycast client enable sntp client enable (interface) The sntp client enable Interface Configuration mode command enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive broadcast and unicast updates. To disable the SNTP client, use the no form of this command. Syntax sntp client enable no sntp client enable This command has no arguments or keywords. Default Configuration Disabled 100 Clock