Dell PowerConnect 5324 Command Line Interface Guide - Page 175
show line, line console, exec-timeout
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Syntax exec-timeout minutes [seconds] no exec-timeout • minutes-Integer that specifies the number of minutes. (Range: 0 - 65535) • seconds-Additional time intervals in seconds. (Range: 0 - 59) Default Configuration The default configuration is 10 minutes. Command Mode Line Configuration mode User Guidelines • To specify no timeout, enter the exec-timeout ("0 0") command. Examples The following example configures the interval that the system waits until user input is detected to 20 minutes. Console (config)# line console Console(config-line)# exec-timeout 20 show line The show line User EXEC mode command displays line parameters. Syntax show line [console | telnet | ssh] • console-Console terminal line. • telnet-Virtual terminal for remote console access (Telnet). • ssh-Virtual terminal for secured remote console access (SSH). Default Configuration Default value is console. Command Mode User EXEC mode User Guidelines • There are no user guidelines for this command. Line Commands 175