Dell PowerConnect 5324 Command Line Interface Guide - Page 212
priority-queue out num-of-queues
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
www.dell.com | support.dell.com Example The following example assigns WRR weights to egress queues. Console(config)# priority-queue num-of-queues 1 Console(config)# interface ethernet g1 Console(config-if)# wrr-queue bandwidth 20 30 50 Console(config)# priority-queue num-of-queues 0 Console(config)# interface ethernet g3 Console(config-if)# wrr-queue bandwidth 20 30 50 10 priority-queue out num-of-queues The priority-queue out num-of-queues Global Configuration mode command enables the egress queues to be expedite queues. Use the no form of this command to return to the default values. Syntax priority-queue out num-of-queues number-of-queues no priority-queue out num-of-queues • number-of-queues-Assign the number of queues to be expedite queues. The expedite queues would be the queues with higher indexes. (Range: 1 - 4) Default Configuration All queues are expedite queues. Command Mode Global Configuration mode User Guidelines • When configuring the priority-queue out num-of-queues command, the weighted round robin (WRR) weight ratios are affected because there are fewer queues participating in WRR. • Queue 4 is taken as the highest index queue. Queue 3 is taken as the next highest queue. If two priority queues are selected then queue 4 and 3 will be used. Leaving queue 2 and 1 for WRR. 212 QoS Commands