Dell PowerConnect 5324 Command Line Interface Guide - Page 217
show qos map, Interface Configuration Ethernet, port-channel command
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
• default-cos-Specifies the default CoS value being assigned to the port. If the port is trusted and the packet is untagged then the default CoS value becomes the CoS value. (Range: 0 - 7) Default Configuration Port CoS is 0. Command Mode Interface Configuration (Ethernet, port-channel) command User Guidelines • You can use the default value to assign a CoS value to all untagged packets entering the port. Example The following example configures port g5 default CoS value to 3. Console (config)# interface ethernet g5 Console (config-if) qos cos 3 show qos map The show qos map User EXEC mode command displays all the QoS maps. Syntax show qos map [dscp-queue] • dscp-queue-Displays the DSCP to queue map. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines • There are no user guidelines for this command. QoS Commands 217