Dell PowerConnect 5324 Command Line Interface Guide - Page 138
port storm-control broadcast rate
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
www.dell.com | support.dell.com no port storm-control broadcast enable Default Configuration Broadcast storm control is disabled. Command Modes Interface Configuration (Ethernet) mode User Guidelines • Use the port storm-control broadcast rate Interface Configuration mode command, to set the maximum allowable broadcast rate. • Multicast can be counted as part of the "storm" frames if the port storm-control include- multicast Global Configuration mode command is already executed. Example The following example enables broadcast storm control on port g5. Console(config)# interface ethernet g5 Console(config-if)# port storm-control broadcast enable port storm-control broadcast rate The port storm-control broadcast rate Interface Configuration mode command configures the maximum broadcast rate. Use the no form of this command to return to the default value. port storm-control broadcast rate rate no port storm-control broadcast rate • rate-Maximum kilobytes per second of broadcast and multicast traffic on a port. (Rate: 0-65535) Default Configuration The default storm control broadcast rate is 1000. Command Mode Global Configuration mode User Guidelines • Use the port storm-control broadcast enable Interface Configuration mode command to enable broadcast storm control. • The granularity is 1 - 64K packets. Note that if the rate is 0, broadcast packets are not forwarded. 138 Ethernet Configuration Commands