Dell PowerConnect 5324 Command Line Interface Guide - Page 233
show rmon alarm-table
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
• type type-The sampling method for the selected variable and calculating the value to be compared against the thresholds. If the method is absolute, the value of the selected variable is compared directly with the thresholds at the end of the sampling interval. If the method is delta, the selected variable value at the last sample is subtracted from the current value, and the difference compared with the thresholds. • startup direction-The alarm that may be sent when this entry is first set to valid. If the first sample (after this entry becomes valid) is greater than or equal to the rthreshold, and direction is equal to rising or rising-falling, then a single rising alarm is generated. If the first sample (after this entry becomes valid) is less than or equal to the fthreshold, and direction is equal to falling or rising-falling, then a single falling alarm is generated. • owner name-Enter a name that specifies who configured this alarm. If unspecified, the name is an empty string. Default Configuration The following parameters have the following default values: • type type-If unspecified, the type is absolute. • startup direction-If unspecified, the startup direction is rising-falling. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. Example The following example configures the following alarm conditions: • Alarm index-1000 • Variable identifier-dell • Sample interval-360000 seconds • Rising threshold-1000000 • Falling threshold-1000000 • Rising threshold event index-10 • Falling threshold event index-20 Console (config)# rmon alarm 1000 dell 360000 1000000 1000000 10 20 show rmon alarm-table The show rmon alarm-table User EXEC mode command displays the alarms summary table. RMON Commands 233