Dell PowerConnect 5324 Command Line Interface Guide - Page 73

Default Configuration No password is required. Command Mode Line Configuration mode User Guidelines • There are no user guidelines for this command. Example The following example specifies a password "secret" on a line. Console (config-line)# password secret enable password The enable password Global Configuration mode command sets a local password to control access to normal and privilege levels. To remove the password requirement, use the no form of this command. Syntax enable password [level level] password [encrypted] no enable password [level level] • password-Password for this level, from 1 to 159 characters in length. • level level-Level for which the password applies. If not specified the level is 15 (Range: 1-15). • encrypted-Encrypted password entered, copied from another device configuration. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. AAA Commands 73