Dell PowerConnect 5324 Command Line Interface Guide - Page 303
Syslog Commands, logging
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Syslog Commands logging on The logging on Global Configuration mode command controls error messages logging. This command sends debug or error messages to a logging process, which logs messages to designated locations asynchronously to the process that generated the messages. To disable the logging process, use the no form of this command. Syntax logging on no logging on Default Configuration Logging is enabled. Command Mode Global Configuration mode User Guidelines • The logging process controls the distribution of logging messages to the various destinations, such as the logging buffer, logging file, or syslog server. Logging on and off for these destinations can be individually configured using the logging buffered, logging file, and logging Global Configuration mode commands. However, if the logging on command is disabled, no messages are sent to these destinations. Only the console receives messages. Example The following example shows how logging is enabled. Console (config)# logging on logging The logging Global Configuration mode command logs messages to a syslog server. To delete the syslog server with the specified address from the list of syslogs, use the no form of this command. Syntax logging {ip-address | hostname} [port port] [severity level] [facility facility] [description text] no logging {ip-address | hostname} • ip-address-IP address of the host to be used as a syslog server. • hostname-Hostname of the host to be used as a syslog server. (Range: 1 - 158 characters) Syslog Commands 303