Dell PowerConnect 5324 Command Line Interface Guide - Page 222
radius-server timeout
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
www.dell.com | support.dell.com Default Configuration The default IP address is the outgoing IP interface. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. Example The following example configures the source IP address used for communication with RADIUS servers to 10.1.1.1. Console (config)# radius-server source-ip 10.1.1.1 radius-server timeout The radius-server timeout Global Configuration mode command sets the interval for which a device waits for a server host to reply. To restore the default, use the no form of this command. Syntax radius-server timeout timeout no radius-server timeout • timeout-Specifies the timeout value in seconds. (Range: 1 - 30) Default Configuration The default value is 3 seconds. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. Example The following example sets the interval for which a device waits for a server host to reply to 5 seconds. Console (config)# radius-server timeout 5 222 Radius Commands