Dell PowerConnect 5324 Command Line Interface Guide - Page 129
show interfaces status
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
The displayed port configuration information includes the following: • Port-The port number. • Port Type-The port designated IEEE shorthand identifier. For example 1000Base-T refers to 1000 Mbps baseband signaling. • Duplex-Displays the port Duplex status. • Speed-Refers to the port speed. • Neg-Describes the Auto-negotiation status. • Flow Control-Displays the Flow Control status. • Back Pressure-Displays the Back Pressure status. • MDIX Mode-Displays the Auto-crossover status. • Admin State-Displays whether the port is enabled or disabled. show interfaces status The show interfaces status User EXEC mode command displays the status for all configured interfaces. Syntax show interfaces status [ethernet interface | port-channel port-channel-number] • interface-A valid Ethernet port. • port-channel-number-A valid port-channel trunk index. Default Configuration This command has no default configuration. Command Mode Privilege EXEC mode User Guidelines • There are no user guidelines for this command. Example The following example displays the status for all configured interfaces. Ethernet Configuration Commands 129