Dell PowerConnect 5324 Command Line Interface Guide - Page 81
bridge multicast forward-all, interface vlan, bridge multicast forward-all add ethernet
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
bridge multicast forward-all The bridge multicast forward-all Interface Configuration mode command enables forwarding of all multicast packets on a port. To restore the default, use the no form of the bridge multicast forward-all command. Syntax bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel portchannel-number-list} no bridge multicast forward-all • add-Adds ports to the group. • remove-Removes ports from the group. • interface-list-Separate non consecutive valid Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list-Separate non consecutive valid port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Configuration Disable forward-all on the specified interface. Command Mode Interface Configuration (VLAN) mode User Guidelines • There are no user guidelines for this command. Example In this example all multicast packets on port g8 are forwarded. Console (config)# interface vlan 2 Console (config-if)# bridge multicast forward-all add ethernet g8 bridge multicast forbidden forward-all The bridge multicast forbidden forward-all Interface Configuration mode command forbids a port to be a forward-all-multicast port. To restore the default, use the no form of the bridge multicast forward-all command. Address Table Commands 81