Dell PowerConnect 5324 Command Line Interface Guide - Page 103
show clock, sntp server
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Default Configuration No servers are defined. Command Mode Global Configuration mode User Guidelines • Up to 8 SNTP servers can be defined. • Use the sntp unicast client enable Global Configuration mode command to enable predefined unicast clients globally. • To enable polling you should also use the sntp unicast client poll Global Configuration mode command for global enabling. • Polling time is determined by the sntp client poll timer Global Configuration mode command. • If multiple servers are added then the updates applied are determined by the following: Unicast Server updates take precedence, followed by Anycast and then Broadcast. Examples The following example configures the device to accept Network Time Protocol (NTP) traffic from the server on 192.1.1.1. Console (config)# sntp server 192.1.1.1 show clock The show clock User EXEC mode command displays the time and date from the system clock. Syntax show clock [detail] • detail-Shows timezone and summertime configuration. Default Configuration This command has no default configuration. Command Mode User EXEC mode Clock 103