Dell PowerConnect 5324 Command Line Interface Guide - Page 313
System Management, ping
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
System Management ping The ping User EXEC mode command sends ICMP echo request packets to another node on the network. Syntax ping ip-address | hostname [size packet_size] [count packet_count] [timeout time_out] • ip-address-IP address to ping. • hostname-hostname to ping. (Range: 1 - 158 characters) • packet_size-Number of bytes in a packet. The actual packet size is eight bytes larger than the size specified because the switch adds header information. (Range: 56 - 1472 bytes) • packet_count-Number of packets to send. If 0 is entered it pings until stopped. (Range: 0 - 65535 packets) • time_out-Timeout in milliseconds to wait for each reply. (Range: 50 - 65535 milliseconds). Default Configuration timeout time_out-The default is 2000 milliseconds. Command Mode User EXEC mode User Guidelines Press Esc to stop pinging. Following are sample results of the ping command: • Destination (host/network) unreachable-The gateway for this destination indicates that the destination is unreachable. Console# ping 180.50.1.1 Pinging 180.50.1.1 with 56 bytes of data: PING: net-unreachable PING: net-unreachable PING: net-unreachable 313