Dell PowerConnect 5324 Command Line Interface Guide - Page 30
LLDP Commands, Sets the line for automatic baud rate detection
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
www.dell.com | support.dell.com speed autobaud exec-timeout show line Sets the line baud rate. Sets the line for automatic baud rate detection Configures the interval that the system waits until user input is detected. Displays line parameters. Line Configuration Line Configuration Line Configuration User EXEC LLDP Commands Command Group lldp enable (global) lldp enable (interface) lldp timer lldp hold-multiplier lldp reinit-delay lldp tx-delay lldp optional-tlv lldp managementaddress clear lldp rx show lldp configuration show lldp local Description Enables Link Layer Discovery Protocol. Enables Link Layer Discovery Protocol (LLDP) on an interface. Specifies how often the software sends Link Layer Discovery Protocol (LLDP) updates. Specifies the amount of time the receiving device should hold a Link Layer Discovery Protocol packet before discarding it. Specifies the minimum time an LLDP port will wait before reinitializing LLDP transmission. Specifies the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Specifies which optional TLVs from the basic set should be transmitted. Specifies the management address that would be advertised from an interface. Restarts the LLDP RX state machine and clears the neighbors table. Displays the Link Layer Discovery Protocol (LLDP) configuration. Displays the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific port. Access Mode Global configuration Interface configuration (Ethernet) Global configuration Global configuration Global configuration Global configuration Interface configuration (Ethernet) Interface configuration (Ethernet) Privileged EXEC Privileged EXEC Privileged EXEC 30 Command Groups