Dell PowerConnect 5324 Command Line Interface Guide - Page 79
interface vlan, bridge multicast address, add ethernet, remove, ethernet
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
bridge multicast address {mac-multicast-address | ip-multicast-address} [add | remove] {ethernet interface-list | port-channel port-channel-number-list} no bridge multicast address {mac-multicast-address | ip-multicast-address} • add-Adds ports to the group. If no option is specified, this is the default option. • remove-Removes ports from the group. • mac-multicast-address-MAC multicast address in the format of xx:xx:xx:xx:xx:xx. • ip- multicast-address-IP multicast address. • interface-list-Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list-Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of ports. Default Configuration No multicast addresses are defined. Command Mode Interface configuration (VLAN) mode User Guidelines • If the command is executed without add or remove, the command only registers the group in the bridge database. • Static multicast addresses can only be defined on static VLANs. Examples The following example registers the MAC address: Console (config)# interface vlan 8 Console (config-if)# bridge multicast address 01:00:5e:02:02:03 The following example registers the MAC address and adds ports statically. Console (config)# interface vlan 8 Console (config-if)# bridge multicast address 01:00:5e:02:02:03 add ethernet g1-9 Address Table Commands 79