Dell PowerConnect 5324 Command Line Interface Guide - Page 85
port security routed secure-address, show bridge address-table, interface ethernet
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
port security routed secure-address The port security routed secure-address Interface Configuration mode command adds MAC-layer secure addresses to a routed port. Use the no form of this command to delete the MAC addresses. Syntax port security routed secure-address mac-address no port security routed secure-address mac-address • mac-address-Specify a MAC address in the format of xx:xx:xx:xx:xx:xx. Default Configuration No addresses are defined. Command Mode Interface configuration (Ethernet, port-channel). Cannot be configured for a range of interfaces (range context). User Guidelines • The command enables adding secure MAC addresses to a routed ports in port security mode. The command is available when the port is a routed port and in port security mode. The address is deleted if the port exits the security mode or is not a routed port. Example In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1. Console (config)# interface ethernet g1 Console (config-if)# port security routed secure-address 66:66:66:66:66:66 show bridge address-table The show bridge address-table Privileged EXEC mode command displays all entries in the bridgeforwarding database. Syntax show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channelnumber] • vlan-Specific valid VLAN, such as VLAN 1. • interface-A valid Ethernet port. Address Table Commands 85