Dell PowerConnect 5324 Command Line Interface Guide - Page 157
IP Addressing Commands, clear host dhcp, ip address
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
IP Addressing Commands clear host dhcp The clear host dhcp Privileged EXEC mode command deletes entries from the host name-toaddress mapping received from Dynamic Host Configuration Protocol (DHCP). Syntax clear host dhcp {name | *} • name-Particular host entry to remove. (Range: 1 - 158 characters.) • *- Removes all entries. Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines • This command would delete the host name-to-address mapping temporarily until the next renew of the IP address. Examples The following example deletes all entries from the host name-to-address mapping. Console# clear host dhcp * ip address The ip address Interface Configuration mode command sets an IP address. To remove an IP address, use the no form of this command. Syntax ip address ip-address {mask | prefix-length} no ip address [ip-address] • ip-address-IP address • mask-Specifies the network mask of the IP address. (Range: Valid Subnet mask) IP Addressing Commands 157