Dell PowerConnect 5324 Command Line Interface Guide - Page 270
spanning-tree mst port-priority
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
www.dell.com | support.dell.com Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. Example The following example configures the maximum number of hops that a packet travels in an MST region before it is discarded to 10. Console (config) # spanning-tree mst max-hops 10 spanning-tree mst port-priority The spanning-tree mst port-priority Interface Configuration mode command configures port priority for the specified MST instance. To return to the default configuration, use the no form of this command. Syntax spanning-tree mst instance-id port-priority priority no spanning-tree mst instance-id port-priority • instance-ID - ID of the spanning tree instance. (Range: 1-15) • priority - The port priority. (Range: 0 - 240 in multiples of 16) Default Setting The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is 128. Command Modes Interface Configuration (Ethernet, port-channel) mode User Guidlines • There are no user guidelines for this command. Example The following example configures the port priority of port g1 to 142. Console(config)# interface ethernet g1 Console(config-if)# spanning-tree mst 1 port-priority 142 270 Spanning-Tree Commands