Dell PowerConnect 5324 Command Line Interface Guide - Page 267
spanning-tree port-priority, spanning-tree portfast
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
spanning-tree port-priority The spanning-tree port-priority Interface Configuration mode command configures port priority. To reset the default port priority, use the no form of this command. Syntax spanning-tree port-priority priority no spanning-tree port-priority • priority-The port priority. (Range: 0 - 240 in multiples of 16) Default Configuration The default port-priority for IEEE STP is 128. Command Modes Interface Configuration (Ethernet, port-channel) mode User Guidelines • There are no user guidelines for this command. Example The following example configures the spanning priority on g5 to 96. Console(config)# interface ethernet g5 Console(config-if)# spanning-tree port-priority 96 spanning-tree portfast The spanning-tree portfast Interface Configuration mode command enables PortFast mode. In PortFast mode, the interface is immediately put into the forwarding state upon linkup, without waiting for the timer to expire. To disable PortFast mode, use the no form of this command. Syntax spanning-tree portfast no spanning-tree portfast Default Configuration PortFast mode is disabled. Command Modes Interface Configuration (Ethernet, port-channel) mode Spanning-Tree Commands 267