Dell PowerConnect 5324 Command Line Interface Guide - Page 189

Management ACL management access-list The management access-list Global Configuration mode command defines an access-list for management, and enters the access-list for configuration. Once in the access-list configuration mode, the denied or permitted access conditions are configured with the deny and permit commands. To remove an access list, use the no form of this command. Syntax management access-list name no management access-list name • name-The access list name using up to 32 characters. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • This command enters the access-list configuration mode, where the denied or permitted access conditions with the deny and permit commands must be defined. • If no match criteria are defined the default is "deny". • If reentering to an access-list context, the new rules are entered at the end of the access-list. • Use the management access-class command to select the active access-list. • The active management list cannot be updated or removed. • Management ACL requires a valid management interface (valid IFindex). A valid management interface is an interface with an IP address. A valid (IFindex) management interface can be a single port, vlan or port-channel. Management ACL only restricts access to the device for management configuration or viewing. Management ACL 189