Dell PowerConnect 5324 Command Line Interface Guide - Page 216
qos trust (Interface), qos cos
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
www.dell.com | support.dell.com • Use this command to specify whether the port is trusted and which fields of the packet to use to classify traffic. • To return to the untrusted state, use the no qos command to apply best effort service. Example The following example configures the system to DSCP trust state. Console (config)# qos trust dscp qos trust (Interface) The qos trust Interface Configuration mode command enables each port trust state. To disable the trust state on each port, use the no form of this command. Syntax qos trust no qos trust Default Configuration Each port is enabled while the system is operational. Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines • Use no qos trust to disable the trust mode on each port. Use qos trust to enable trust mode on each port. Example The following example configures port g5 to default trust state (CoS). Console (config)# interface ethernet g5 Console (config-if) qos trust qos cos The qos cos Interface Configuration mode command configures the default port CoS value. To return to the default setting, use the no form of this command. Syntax qos cos default-cos no qos cos 216 QoS Commands