Dell PowerConnect 5324 Command Line Interface Guide - Page 154
show ip igmp snooping groups
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
www.dell.com | support.dell.com Command Mode User EXEC mode User Guidelines • There are no user guidelines for this command. Example The example displays IGMP snooping information. Console # show ip igmp snooping interface 1 IGMP Snooping is globaly disabled IGMP Snooping is disabled on VLAN 1 IGMP host timeout is 260 sec IGMP Immediate leave is disabled. IGMP leave timeout is 60 sec IGMP mrouter timeout is 300 sec Automatic learning of multicast router ports is enabled show ip igmp snooping groups The show ip igmp snooping groups User EXEC mode command displays the multicast groups learned by IGMP snooping. Syntax show ip igmp snooping groups [vlan vlan-id] [address ip-multicast-address] • vlan_id-VLAN ID value. • ip-multicast-address-IP multicast address. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines • To see the full multicast address table (including static addresses) use the show bridge address-table command. 154 IGMP Snooping Commands