Dell PowerConnect 5324 Command Line Interface Guide - Page 384
ADVANCED FEATURES, dot1x auth-not-req
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
www.dell.com | support.dell.com EapolReqFramesTx InvalidEapolFramesRx EapLengthErrorFramesRx LastEapolFrameVersion LastEapolFrameSource The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator. The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. The protocol version number carried in the most recently received EAPOL frame. The source MAC address carried carried in the most recently received EAPOL frame. ADVANCED FEATURES dot1x auth-not-req The dot1x auth-not-req VLAN Configuration mode command enables unauthorized users access to that VLAN. Use the no form of this command to disable the access. Syntax dot1x auth-not-req no dot1x auth-not-req This command has no arguments or keywords. Default Configuration User should be authorized to access the VLAN. Command Mode VLAN Configuration mode User Guidelines • An access port cannot be a member in an unauthenticated VLAN. The native VLAN of a trunk port cannot be an unauthenticated VLAN. For a general port, the PVID can be the Unauthenticated VLAN (although only tagged packets would be accepted in Unauthorized state.) Examples The following example enables unauthorized users access to the VLAN. console config-if(Config-VLAN)# dot1x auth-not-req 384 802.1x Commands