Dell PowerConnect 5324 Command Line Interface Guide - Page 190
permit (management)
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
www.dell.com | support.dell.com Examples The following example shows how to create an access-list called "mlist", configure two management interfaces ethernet g1 and ethernet g9, and make the access-list the active list. Console (config)# management access-list mlist Console (config-macl)# permit ethernet g1 Console (config-macl)# permit ethernet g9 Console (config-macl)# exit Console (config)# management access-class mlist The following example shows how to create an access-list called "mlist", configure all interfaces to be management interfaces except interfaces ethernet g1 and ethernet g9, and make the access-list the active list. Console (config)# management access-list mlist Console (config-macl)# deny ethernet g1 Console (config-macl)# deny ethernet g9 Console (config-macl)# permit Console (config-macl)# exit Console (config)# management access-class mlist permit (management) The permit Management Access-List Configuration mode command defines a permit rule. Syntax permit [ethernet interface-number | vlan vlan-id | port-channel number] [service service] permit ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel number] [service service] • ethernet interface-number-A valid Ethernet port number. • vlan vlan-id-A valid VLAN number. • port-channel number-A valid port channel number. • ip-address-Source IP address.(Range: Valid IP Address) • mask mask-Specifies the network mask of the source IP address. (Range: Valid subnet mask) 190 Management ACL