Dell PowerConnect 5324 Command Line Interface Guide - Page 183
lldp optional-tlv, lldp management-address
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Usage Guidelines • It is recommended that the TxDelay would be less than 0.25 of the LLDP timer interval. Examples The following example specifies the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Console (config) # lldp tx-delay 7 lldp optional-tlv To specify which optional TLVs from the basic set should be transmitted, use the lldp optional-tlv command in interface configuration mode. To revert to the default setting, use the no form of this command. Syntax lldp optional-tlv tlv1 [tlv2 ... tlv5] no lldp optional-tlv • tlv - Specifies TLV that should be included. Available optional TLVs are: port-desc, sysname, sys-desc and sys-cap . (Range 1-8192 seconds). Default Configuration No optional TLV is transmitted. Command Modes Interface configuration (Ethernet) User Guidelines • There are no user guidelines for this command. Example The following example specifies which optional TLV (2)s from the basic set should be transmitted. Console(config)# interface ethernet g5 Console(config-if)# lldp optional-tlv sys-name lldp management-address To specify the management address that would be advertised from an interface, use the lldp management-address command in interface configuration mode. To stop advertising management address information, use the no form of this command. LLDP Commands 183