Dell PowerConnect 5324 Command Line Interface Guide - Page 246
snmp-server trap authentication, snmp-server host
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
www.dell.com | support.dell.com snmp-server trap authentication The snmp-server trap authentication Global Configuration mode command enables the switch to send Simple Network Management Protocol traps when authentication fails. To disable SNMP authentication failed traps, use the no form of this command. Syntax snmp-server trap authentication no snmp-server trap authentication Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • There are no user guidelines for this command. Examples The following example displays the command to enable authentication failed SNMP traps. Console (config)# snmp-server trap authentication snmp-server host To specify the recipient of Simple Network Management Protocol notification operation, use the snmp-server host global configuration command. Use the no form of this command to remove the specified host. Syntax snmp-server host {ip-address | hostname} community-string [traps | informs] [1 | 2] [udp-port port] [filter filtername] [timeout seconds] [retries retries] no snmp-server host {ip-address | hostname} [traps | informs] • ip-address - Internet address of the host (the targeted recipient). An out-of-band IP address can be specified as described in the usage guidelines. • hostname - Hostname of the host. (Range: 1 - 158 characters). • community-string - Password-like community string sent with the notification operation. (Range: 1 - 20 chars) • traps - Sends SNMP traps to this host (Default). • informs- Sends SNMP informs to this host. Not applicable to SNMPv1. 246 SNMP Commands