Dell PowerConnect 5324 Command Line Interface Guide - Page 70
ip https authentication, show authentication methods
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
www.dell.com | support.dell.com ip https authentication The ip https authentication Global Configuration mode command specifies authentication methods for https servers. To return to the default, use the no form of this command. Syntax ip https authentication method1 [method2...] no ip https authentication • method1 [method2...]-Specify at least one from the following table: Keyword local none radius tacacs Source or destination Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS servers for authentication. Default Configuration The local user database is checked. This has the same effect as the command ip https authentication local. Command Mode Global Configuration mode User Guidelines • The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. Example The following example configures https authentication. Console (config)# ip https authentication radius local Console (config)# ip https authentication tacacs local show authentication methods The authentication methods Privilege EXEC mode command displays information about the authentication methods. 70 AAA Commands