Dell PowerConnect 5324 Command Line Interface Guide - Page 150
ip igmp snooping mrouter, ip igmp snooping host-time-out, interface vlan, ip igmp snooping
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
www.dell.com | support.dell.com User Guidelines • IGMP snooping can only be enabled on static VLANs. Example The following example enables IGMP snooping on VLAN 2. Console (config)# interface vlan 2 Console (config-if)# ip igmp snooping ip igmp snooping mrouter The ip igmp snooping mrouter Interface Configuration mode command enables automatic learning of multicast router ports in the context of a specific VLAN. To remove automatic learning of multicast router ports, use the no form of this command. Syntax ip igmp snooping mrouter learn-pim-dvmrp no ip igmp snooping mrouter learn-pim-dvmrp Default Configuration Automatic learning of mrouter ports is enabled. Command Mode Interface Configuration (VLAN) mode User Guidelines • Multicast router ports can be configured statically by the bridge multicast forward-all command. Example The following example enables automatic learning of multicast router ports on VLANs. Console (config) # interface vlan 2 Console (config-if)# ip igmp snooping mrouter learn-pim-dvmrp ip igmp snooping host-time-out The ip igmp snooping host-time-out Interface Configuration mode command configures the hosttime-out. If an IGMP report for a multicast group was not received for a host-time-out period, from a specific port, this port is deleted from the member list of that multicast group. To reset to default host-time-out use the no form of this command. 150 IGMP Snooping Commands