Dell PowerConnect 5324 Command Line Interface Guide - Page 342
name, switchport access vlan
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
www.dell.com | support.dell.com Example The following example groups VLAN 221 until 228 and VLAN 889 to receive the same command. Console (config)# interface range vlan 221-228,889 Console (config-if)# name The name Interface Configuration mode command adds a name to a VLAN. To remove the VLAN name use the no form of this command. Syntax name string no name • string-Unique name, up to 32 characters in length, to be associated with this VLAN. Default Configuration No name is defined. Command Mode Interface Configuration (VLAN) mode User Guidelines • The VLAN name should be unique. Example The following example names VLAN number 19 with the name "Marketing". Console (config)# interface vlan 19 Console (config-if)# name Marketing switchport access vlan The switchport access vlan Interface Configuration mode command configures the VLAN ID when the interface is in access mode. To reconfigure the default, use the no form of this command. Syntax switchport access vlan vlan-id no switchport access vlan • vlan-id-VID of the VLAN to which the port is configured. 342 VLAN Commands