Dell PowerConnect 5324 Command Line Interface Guide - Page 69
ip http authentication, line console, enable authentication default
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Console (config)# line console Console (config-line)# enable authentication default ip http authentication The ip http authentication Global Configuration mode command specifies authentication methods for http. To return to the default, use the no form of this command. Syntax ip http authentication method1 [method2...] no ip http authentication • method1 [method2...]-Specify at least one from the following table: Keyword local none radius tacacs Source or destination Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS servers for authentication. Default Configuration The local user database is checked. This has the same effect as the command ip http authentication local. Command Mode Global Configuration mode User Guidelines • The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. Example The following example configures the http authentication. Console (config)# ip http authentication radius local Console (config)# ip http authentication tacacs local AAA Commands 69