Dell PowerConnect 5324 Command Line Interface Guide - Page 244
snmp-server contact
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
www.dell.com | support.dell.com User Guidelines • You can enter this command multiple times for the same filter record. Later lines take precedence when an object identifier is included in two or more lines. . Example The following example creates a filter that includes all objects in the MIB-II system group except for sysServices (System 7) and all objects for interface 1 in the MIB-II interfaces group: Console (config)# snmp-server view user-view system included Console (config)# snmp-server view user-view system.7 excluded Console (config)# snmp-server view user-view ifEntry.*.1 included snmp-server contact The snmp-server contact Global Configuration mode command sets up a system contact. To remove the system contact information, use the no form of the command. Syntax snmp-server contact text no snmp-server contact • text-Character string, up to 160 characters, describing the system contact information. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines • Do not include spaces in the text string. Example The following example displays setting up the system contact point as "Dell_Technical_Support". Console (config)# snmp-server contact Dell_Technical_Support snmp-server location The snmp-server location Global Configuration mode command sets up information on where the device is located. To remove the location string use, the no form of this command. 244 SNMP Commands